1.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000
1.2 +++ b/INSTALL Sat Oct 26 18:47:33 2013 +0100
1.3 @@ -0,0 +1,365 @@
1.4 +Installation Instructions
1.5 +*************************
1.6 +
1.7 +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
1.8 +2006, 2007, 2008, 2009 Free Software Foundation, Inc.
1.9 +
1.10 + Copying and distribution of this file, with or without modification,
1.11 +are permitted in any medium without royalty provided the copyright
1.12 +notice and this notice are preserved. This file is offered as-is,
1.13 +without warranty of any kind.
1.14 +
1.15 +Basic Installation
1.16 +==================
1.17 +
1.18 + Briefly, the shell commands `./configure; make; make install' should
1.19 +configure, build, and install this package. The following
1.20 +more-detailed instructions are generic; see the `README' file for
1.21 +instructions specific to this package. Some packages provide this
1.22 +`INSTALL' file but do not implement all of the features documented
1.23 +below. The lack of an optional feature in a given package is not
1.24 +necessarily a bug. More recommendations for GNU packages can be found
1.25 +in *note Makefile Conventions: (standards)Makefile Conventions.
1.26 +
1.27 + The `configure' shell script attempts to guess correct values for
1.28 +various system-dependent variables used during compilation. It uses
1.29 +those values to create a `Makefile' in each directory of the package.
1.30 +It may also create one or more `.h' files containing system-dependent
1.31 +definitions. Finally, it creates a shell script `config.status' that
1.32 +you can run in the future to recreate the current configuration, and a
1.33 +file `config.log' containing compiler output (useful mainly for
1.34 +debugging `configure').
1.35 +
1.36 + It can also use an optional file (typically called `config.cache'
1.37 +and enabled with `--cache-file=config.cache' or simply `-C') that saves
1.38 +the results of its tests to speed up reconfiguring. Caching is
1.39 +disabled by default to prevent problems with accidental use of stale
1.40 +cache files.
1.41 +
1.42 + If you need to do unusual things to compile the package, please try
1.43 +to figure out how `configure' could check whether to do them, and mail
1.44 +diffs or instructions to the address given in the `README' so they can
1.45 +be considered for the next release. If you are using the cache, and at
1.46 +some point `config.cache' contains results you don't want to keep, you
1.47 +may remove or edit it.
1.48 +
1.49 + The file `configure.ac' (or `configure.in') is used to create
1.50 +`configure' by a program called `autoconf'. You need `configure.ac' if
1.51 +you want to change it or regenerate `configure' using a newer version
1.52 +of `autoconf'.
1.53 +
1.54 + The simplest way to compile this package is:
1.55 +
1.56 + 1. `cd' to the directory containing the package's source code and type
1.57 + `./configure' to configure the package for your system.
1.58 +
1.59 + Running `configure' might take a while. While running, it prints
1.60 + some messages telling which features it is checking for.
1.61 +
1.62 + 2. Type `make' to compile the package.
1.63 +
1.64 + 3. Optionally, type `make check' to run any self-tests that come with
1.65 + the package, generally using the just-built uninstalled binaries.
1.66 +
1.67 + 4. Type `make install' to install the programs and any data files and
1.68 + documentation. When installing into a prefix owned by root, it is
1.69 + recommended that the package be configured and built as a regular
1.70 + user, and only the `make install' phase executed with root
1.71 + privileges.
1.72 +
1.73 + 5. Optionally, type `make installcheck' to repeat any self-tests, but
1.74 + this time using the binaries in their final installed location.
1.75 + This target does not install anything. Running this target as a
1.76 + regular user, particularly if the prior `make install' required
1.77 + root privileges, verifies that the installation completed
1.78 + correctly.
1.79 +
1.80 + 6. You can remove the program binaries and object files from the
1.81 + source code directory by typing `make clean'. To also remove the
1.82 + files that `configure' created (so you can compile the package for
1.83 + a different kind of computer), type `make distclean'. There is
1.84 + also a `make maintainer-clean' target, but that is intended mainly
1.85 + for the package's developers. If you use it, you may have to get
1.86 + all sorts of other programs in order to regenerate files that came
1.87 + with the distribution.
1.88 +
1.89 + 7. Often, you can also type `make uninstall' to remove the installed
1.90 + files again. In practice, not all packages have tested that
1.91 + uninstallation works correctly, even though it is required by the
1.92 + GNU Coding Standards.
1.93 +
1.94 + 8. Some packages, particularly those that use Automake, provide `make
1.95 + distcheck', which can by used by developers to test that all other
1.96 + targets like `make install' and `make uninstall' work correctly.
1.97 + This target is generally not run by end users.
1.98 +
1.99 +Compilers and Options
1.100 +=====================
1.101 +
1.102 + Some systems require unusual options for compilation or linking that
1.103 +the `configure' script does not know about. Run `./configure --help'
1.104 +for details on some of the pertinent environment variables.
1.105 +
1.106 + You can give `configure' initial values for configuration parameters
1.107 +by setting variables in the command line or in the environment. Here
1.108 +is an example:
1.109 +
1.110 + ./configure CC=c99 CFLAGS=-g LIBS=-lposix
1.111 +
1.112 + *Note Defining Variables::, for more details.
1.113 +
1.114 +Compiling For Multiple Architectures
1.115 +====================================
1.116 +
1.117 + You can compile the package for more than one kind of computer at the
1.118 +same time, by placing the object files for each architecture in their
1.119 +own directory. To do this, you can use GNU `make'. `cd' to the
1.120 +directory where you want the object files and executables to go and run
1.121 +the `configure' script. `configure' automatically checks for the
1.122 +source code in the directory that `configure' is in and in `..'. This
1.123 +is known as a "VPATH" build.
1.124 +
1.125 + With a non-GNU `make', it is safer to compile the package for one
1.126 +architecture at a time in the source code directory. After you have
1.127 +installed the package for one architecture, use `make distclean' before
1.128 +reconfiguring for another architecture.
1.129 +
1.130 + On MacOS X 10.5 and later systems, you can create libraries and
1.131 +executables that work on multiple system types--known as "fat" or
1.132 +"universal" binaries--by specifying multiple `-arch' options to the
1.133 +compiler but only a single `-arch' option to the preprocessor. Like
1.134 +this:
1.135 +
1.136 + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
1.137 + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
1.138 + CPP="gcc -E" CXXCPP="g++ -E"
1.139 +
1.140 + This is not guaranteed to produce working output in all cases, you
1.141 +may have to build one architecture at a time and combine the results
1.142 +using the `lipo' tool if you have problems.
1.143 +
1.144 +Installation Names
1.145 +==================
1.146 +
1.147 + By default, `make install' installs the package's commands under
1.148 +`/usr/local/bin', include files under `/usr/local/include', etc. You
1.149 +can specify an installation prefix other than `/usr/local' by giving
1.150 +`configure' the option `--prefix=PREFIX', where PREFIX must be an
1.151 +absolute file name.
1.152 +
1.153 + You can specify separate installation prefixes for
1.154 +architecture-specific files and architecture-independent files. If you
1.155 +pass the option `--exec-prefix=PREFIX' to `configure', the package uses
1.156 +PREFIX as the prefix for installing programs and libraries.
1.157 +Documentation and other data files still use the regular prefix.
1.158 +
1.159 + In addition, if you use an unusual directory layout you can give
1.160 +options like `--bindir=DIR' to specify different values for particular
1.161 +kinds of files. Run `configure --help' for a list of the directories
1.162 +you can set and what kinds of files go in them. In general, the
1.163 +default for these options is expressed in terms of `${prefix}', so that
1.164 +specifying just `--prefix' will affect all of the other directory
1.165 +specifications that were not explicitly provided.
1.166 +
1.167 + The most portable way to affect installation locations is to pass the
1.168 +correct locations to `configure'; however, many packages provide one or
1.169 +both of the following shortcuts of passing variable assignments to the
1.170 +`make install' command line to change installation locations without
1.171 +having to reconfigure or recompile.
1.172 +
1.173 + The first method involves providing an override variable for each
1.174 +affected directory. For example, `make install
1.175 +prefix=/alternate/directory' will choose an alternate location for all
1.176 +directory configuration variables that were expressed in terms of
1.177 +`${prefix}'. Any directories that were specified during `configure',
1.178 +but not in terms of `${prefix}', must each be overridden at install
1.179 +time for the entire installation to be relocated. The approach of
1.180 +makefile variable overrides for each directory variable is required by
1.181 +the GNU Coding Standards, and ideally causes no recompilation.
1.182 +However, some platforms have known limitations with the semantics of
1.183 +shared libraries that end up requiring recompilation when using this
1.184 +method, particularly noticeable in packages that use GNU Libtool.
1.185 +
1.186 + The second method involves providing the `DESTDIR' variable. For
1.187 +example, `make install DESTDIR=/alternate/directory' will prepend
1.188 +`/alternate/directory' before all installation names. The approach of
1.189 +`DESTDIR' overrides is not required by the GNU Coding Standards, and
1.190 +does not work on platforms that have drive letters. On the other hand,
1.191 +it does better at avoiding recompilation issues, and works well even
1.192 +when some directory options were not specified in terms of `${prefix}'
1.193 +at `configure' time.
1.194 +
1.195 +Optional Features
1.196 +=================
1.197 +
1.198 + If the package supports it, you can cause programs to be installed
1.199 +with an extra prefix or suffix on their names by giving `configure' the
1.200 +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
1.201 +
1.202 + Some packages pay attention to `--enable-FEATURE' options to
1.203 +`configure', where FEATURE indicates an optional part of the package.
1.204 +They may also pay attention to `--with-PACKAGE' options, where PACKAGE
1.205 +is something like `gnu-as' or `x' (for the X Window System). The
1.206 +`README' should mention any `--enable-' and `--with-' options that the
1.207 +package recognizes.
1.208 +
1.209 + For packages that use the X Window System, `configure' can usually
1.210 +find the X include and library files automatically, but if it doesn't,
1.211 +you can use the `configure' options `--x-includes=DIR' and
1.212 +`--x-libraries=DIR' to specify their locations.
1.213 +
1.214 + Some packages offer the ability to configure how verbose the
1.215 +execution of `make' will be. For these packages, running `./configure
1.216 +--enable-silent-rules' sets the default to minimal output, which can be
1.217 +overridden with `make V=1'; while running `./configure
1.218 +--disable-silent-rules' sets the default to verbose, which can be
1.219 +overridden with `make V=0'.
1.220 +
1.221 +Particular systems
1.222 +==================
1.223 +
1.224 + On HP-UX, the default C compiler is not ANSI C compatible. If GNU
1.225 +CC is not installed, it is recommended to use the following options in
1.226 +order to use an ANSI C compiler:
1.227 +
1.228 + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
1.229 +
1.230 +and if that doesn't work, install pre-built binaries of GCC for HP-UX.
1.231 +
1.232 + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
1.233 +parse its `<wchar.h>' header file. The option `-nodtk' can be used as
1.234 +a workaround. If GNU CC is not installed, it is therefore recommended
1.235 +to try
1.236 +
1.237 + ./configure CC="cc"
1.238 +
1.239 +and if that doesn't work, try
1.240 +
1.241 + ./configure CC="cc -nodtk"
1.242 +
1.243 + On Solaris, don't put `/usr/ucb' early in your `PATH'. This
1.244 +directory contains several dysfunctional programs; working variants of
1.245 +these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
1.246 +in your `PATH', put it _after_ `/usr/bin'.
1.247 +
1.248 + On Haiku, software installed for all users goes in `/boot/common',
1.249 +not `/usr/local'. It is recommended to use the following options:
1.250 +
1.251 + ./configure --prefix=/boot/common
1.252 +
1.253 +Specifying the System Type
1.254 +==========================
1.255 +
1.256 + There may be some features `configure' cannot figure out
1.257 +automatically, but needs to determine by the type of machine the package
1.258 +will run on. Usually, assuming the package is built to be run on the
1.259 +_same_ architectures, `configure' can figure that out, but if it prints
1.260 +a message saying it cannot guess the machine type, give it the
1.261 +`--build=TYPE' option. TYPE can either be a short name for the system
1.262 +type, such as `sun4', or a canonical name which has the form:
1.263 +
1.264 + CPU-COMPANY-SYSTEM
1.265 +
1.266 +where SYSTEM can have one of these forms:
1.267 +
1.268 + OS
1.269 + KERNEL-OS
1.270 +
1.271 + See the file `config.sub' for the possible values of each field. If
1.272 +`config.sub' isn't included in this package, then this package doesn't
1.273 +need to know the machine type.
1.274 +
1.275 + If you are _building_ compiler tools for cross-compiling, you should
1.276 +use the option `--target=TYPE' to select the type of system they will
1.277 +produce code for.
1.278 +
1.279 + If you want to _use_ a cross compiler, that generates code for a
1.280 +platform different from the build platform, you should specify the
1.281 +"host" platform (i.e., that on which the generated programs will
1.282 +eventually be run) with `--host=TYPE'.
1.283 +
1.284 +Sharing Defaults
1.285 +================
1.286 +
1.287 + If you want to set default values for `configure' scripts to share,
1.288 +you can create a site shell script called `config.site' that gives
1.289 +default values for variables like `CC', `cache_file', and `prefix'.
1.290 +`configure' looks for `PREFIX/share/config.site' if it exists, then
1.291 +`PREFIX/etc/config.site' if it exists. Or, you can set the
1.292 +`CONFIG_SITE' environment variable to the location of the site script.
1.293 +A warning: not all `configure' scripts look for a site script.
1.294 +
1.295 +Defining Variables
1.296 +==================
1.297 +
1.298 + Variables not defined in a site shell script can be set in the
1.299 +environment passed to `configure'. However, some packages may run
1.300 +configure again during the build, and the customized values of these
1.301 +variables may be lost. In order to avoid this problem, you should set
1.302 +them in the `configure' command line, using `VAR=value'. For example:
1.303 +
1.304 + ./configure CC=/usr/local2/bin/gcc
1.305 +
1.306 +causes the specified `gcc' to be used as the C compiler (unless it is
1.307 +overridden in the site shell script).
1.308 +
1.309 +Unfortunately, this technique does not work for `CONFIG_SHELL' due to
1.310 +an Autoconf bug. Until the bug is fixed you can use this workaround:
1.311 +
1.312 + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
1.313 +
1.314 +`configure' Invocation
1.315 +======================
1.316 +
1.317 + `configure' recognizes the following options to control how it
1.318 +operates.
1.319 +
1.320 +`--help'
1.321 +`-h'
1.322 + Print a summary of all of the options to `configure', and exit.
1.323 +
1.324 +`--help=short'
1.325 +`--help=recursive'
1.326 + Print a summary of the options unique to this package's
1.327 + `configure', and exit. The `short' variant lists options used
1.328 + only in the top level, while the `recursive' variant lists options
1.329 + also present in any nested packages.
1.330 +
1.331 +`--version'
1.332 +`-V'
1.333 + Print the version of Autoconf used to generate the `configure'
1.334 + script, and exit.
1.335 +
1.336 +`--cache-file=FILE'
1.337 + Enable the cache: use and save the results of the tests in FILE,
1.338 + traditionally `config.cache'. FILE defaults to `/dev/null' to
1.339 + disable caching.
1.340 +
1.341 +`--config-cache'
1.342 +`-C'
1.343 + Alias for `--cache-file=config.cache'.
1.344 +
1.345 +`--quiet'
1.346 +`--silent'
1.347 +`-q'
1.348 + Do not print messages saying which checks are being made. To
1.349 + suppress all normal output, redirect it to `/dev/null' (any error
1.350 + messages will still be shown).
1.351 +
1.352 +`--srcdir=DIR'
1.353 + Look for the package's source code in directory DIR. Usually
1.354 + `configure' can determine that directory automatically.
1.355 +
1.356 +`--prefix=DIR'
1.357 + Use DIR as the installation prefix. *note Installation Names::
1.358 + for more details, including other options available for fine-tuning
1.359 + the installation locations.
1.360 +
1.361 +`--no-create'
1.362 +`-n'
1.363 + Run the configure checks, but stop before creating any output
1.364 + files.
1.365 +
1.366 +`configure' also accepts some other, not widely useful, options. Run
1.367 +`configure --help' for more details.
1.368 +