#!/bin/sh

 # install - install a program, script, or datafile

 scriptversion=2004-04-01.17

 # This originates from X11R5 (mit/util/scripts/install.sh), which was

 # later released in X11R6 (xc/config/util/install.sh) with the

 # following copyright and license.

 #

 # Copyright (C) 1994 X Consortium

 #

 # Permission is hereby granted, free of charge, to any person obtaining a copy

 # of this software and associated documentation files (the "Software"), to

 # deal in the Software without restriction, including without limitation the

 # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or

 # sell copies of the Software, and to permit persons to whom the Software is

 # furnished to do so, subject to the following conditions:

 #

 # The above copyright notice and this permission notice shall be included in

 # all copies or substantial portions of the Software.

 #

 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE

 # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN

 # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-

 # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

 #

 # Except as contained in this notice, the name of the X Consortium shall not

 # be used in advertising or otherwise to promote the sale, use or other deal-

 # ings in this Software without prior written authorization from the X Consor-

 # tium.

 #

 #

 # FSF changes to this file are in the public domain.

 #

 # Calling this script install-sh is preferred over install.sh, to prevent

 # `make' implicit rules from creating a file called install from it

 # when there is no Makefile.

 #

 # This script is compatible with the BSD install script, but was written

 # from scratch.  It can only install one file at a time, a restriction

 # shared with many OS's install programs.

 # set DOITPROG to echo to test this script

 # Don't use :- since 4.3BSD and earlier shells don't like it.

 doit="${DOITPROG-}"

 # put in absolute paths if you don't have them in your path; or use env. vars.

 mvprog="${MVPROG-mv}"

 cpprog="${CPPROG-cp}"

 chmodprog="${CHMODPROG-chmod}"

 chownprog="${CHOWNPROG-chown}"

 chgrpprog="${CHGRPPROG-chgrp}"

 stripprog="${STRIPPROG-strip}"

 rmprog="${RMPROG-rm}"

 mkdirprog="${MKDIRPROG-mkdir}"

 transformbasename=

 transform_arg=

 instcmd="$mvprog"

 chmodcmd="$chmodprog 0755"

 chowncmd=

 chgrpcmd=

 stripcmd=

 rmcmd="$rmprog -f"

 mvcmd="$mvprog"

 src=

 dst=

 dir_arg=

 usage="Usage: $0 [OPTION]... SRCFILE DSTFILE

    or: $0 [OPTION]... SRCFILES... DIRECTORY

    or: $0 -d DIRECTORIES...

 In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.

 In the second, create the directory path DIR.

 Options:

 -b=TRANSFORMBASENAME

 -c         copy source (using $cpprog) instead of moving (using $mvprog).

 -d         create directories instead of installing files.

 -g GROUP   $chgrp installed files to GROUP.

 -m MODE    $chmod installed files to MODE.

 -o USER    $chown installed files to USER.

 -s         strip installed files (using $stripprog).

 -t=TRANSFORM

 --help     display this help and exit.

 --version  display version info and exit.

 Environment variables override the default commands:

   CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG

 "

 while test -n "$1"; do

   case $1 in

     -b=*) transformbasename=`echo $1 | sed 's/-b=//'`

         shift

         continue;;

     -c) instcmd=$cpprog

         shift

         continue;;

     -d) dir_arg=true

         shift

         continue;;

     -g) chgrpcmd="$chgrpprog $2"

         shift

         shift

         continue;;

     --help) echo "$usage"; exit 0;;

     -m) chmodcmd="$chmodprog $2"

         shift

         shift

         continue;;

     -o) chowncmd="$chownprog $2"

         shift

         shift

         continue;;

     -s) stripcmd=$stripprog

         shift

         continue;;

     -t=*) transformarg=`echo $1 | sed 's/-t=//'`

         shift

         continue;;

     --version) echo "$0 $scriptversion"; exit 0;;

     *)  # When -d is used, all remaining arguments are directories to create.

 	test -n "$dir_arg" && break

         # Otherwise, the last argument is the destination.  Remove it from $@.

 	for arg

 	do

           if test -n "$dstarg"; then

 	    # $@ is not empty: it contains at least $arg.

 	    set fnord "$@" "$dstarg"

 	    shift # fnord

 	  fi

 	  shift # arg

 	  dstarg=$arg

 	done

 	break;;

   esac

 done

 if test -z "$1"; then

   if test -z "$dir_arg"; then

     echo "$0: no input file specified." >&2

     exit 1

   fi

   # It's OK to call `install-sh -d' without argument.

   # This can happen when creating conditional directories.

   exit 0

 fi

 for src

 do

   # Protect names starting with `-'.

   case $src in

     -*) src=./$src ;;

   esac

   if test -n "$dir_arg"; then

     dst=$src

     src=

     if test -d "$dst"; then

       instcmd=:

       chmodcmd=

     else

       instcmd=$mkdirprog

     fi

   else

     # Waiting for this to be detected by the "$instcmd $src $dsttmp" command

     # might cause directories to be created, which would be especially bad

     # if $src (and thus $dsttmp) contains '*'.

     if test ! -f "$src" && test ! -d "$src"; then

       echo "$0: $src does not exist." >&2

       exit 1

     fi

     if test -z "$dstarg"; then

       echo "$0: no destination specified." >&2

       exit 1

     fi

     dst=$dstarg

     # Protect names starting with `-'.

     case $dst in

       -*) dst=./$dst ;;

     esac

     # If destination is a directory, append the input filename; won't work

     # if double slashes aren't ignored.

     if test -d "$dst"; then

       dst=$dst/`basename "$src"`

     fi

   fi

   # This sed command emulates the dirname command.

   dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

   # Make sure that the destination directory exists.

   # Skip lots of stat calls in the usual case.

   if test ! -d "$dstdir"; then

     defaultIFS='

 	 '

     IFS="${IFS-$defaultIFS}"

     oIFS=$IFS

     # Some sh's can't handle IFS=/ for some reason.

     IFS='%'

     set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`

     IFS=$oIFS

     pathcomp=

     while test $# -ne 0 ; do

       pathcomp=$pathcomp$1

       shift

       if test ! -d "$pathcomp"; then

         $mkdirprog "$pathcomp" || lasterr=$?

 	# mkdir can fail with a `File exist' error in case several

 	# install-sh are creating the directory concurrently.  This

 	# is OK.

 	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }

       fi

       pathcomp=$pathcomp/

     done

   fi

   if test -n "$dir_arg"; then

     $doit $instcmd "$dst" \

       && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \

       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \

       && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \

       && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }

   else

     # If we're going to rename the final executable, determine the name now.

     if test -z "$transformarg"; then

       dstfile=`basename "$dst"`

     else

       dstfile=`basename "$dst" $transformbasename \

                | sed $transformarg`$transformbasename

     fi

     # don't allow the sed command to completely eliminate the filename.

     test -z "$dstfile" && dstfile=`basename "$dst"`

     # Make a couple of temp file names in the proper directory.

     dsttmp=$dstdir/_inst.$$_

     rmtmp=$dstdir/_rm.$$_

     # Trap to clean up those temp files at exit.

     trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0

     trap '(exit $?); exit' 1 2 13 15

     # Move or copy the file name to the temp name

     $doit $instcmd "$src" "$dsttmp" &&

     # and set any options; do chmod last to preserve setuid bits.

     #

     # If any of these fail, we abort the whole thing.  If we want to

     # ignore errors from any of these, just make sure not to ignore

     # errors from the above "$doit $instcmd $src $dsttmp" command.

     #

     { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \

       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \

       && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \

       && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&

     # Now rename the file to the real destination.

     { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \

       || {

 	   # The rename failed, perhaps because mv can't rename something else

 	   # to itself, or perhaps because mv is so ancient that it does not

 	   # support -f.

 	   # Now remove or move aside any old file at destination location.

 	   # We try this two ways since rm can't unlink itself on some

 	   # systems and the destination file might be busy for other

 	   # reasons.  In this case, the final cleanup might fail but the new

 	   # file should still install successfully.

 	   {

 	     if test -f "$dstdir/$dstfile"; then

 	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \

 	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \

 	       || {

 		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2

 		 (exit 1); exit

 	       }

 	     else

 	       :

 	     fi

 	   } &&

 	   # Now rename the file to the real destination.

 	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"

 	 }

     }

   fi || { (exit 1); exit; }

 done

 # The final little trick to "correctly" pass the exit status to the exit trap.

 {

   (exit 0); exit

 }

 # Local variables:

 # eval: (add-hook 'write-file-hooks 'time-stamp)

 # time-stamp-start: "scriptversion="

 # time-stamp-format: "%:y-%02m-%02d.%02H"

 # time-stamp-end: "$"

 # End: