renatofilho@608: Basic Installation renatofilho@608: ================== renatofilho@608: renatofilho@608: These are generic installation instructions. renatofilho@608: renatofilho@608: The `configure' shell script attempts to guess correct values for renatofilho@608: various system-dependent variables used during compilation. It uses renatofilho@608: those values to create a `Makefile' in each directory of the package. renatofilho@608: It may also create one or more `.h' files containing system-dependent renatofilho@608: definitions. Finally, it creates a shell script `config.status' that renatofilho@608: you can run in the future to recreate the current configuration, a file renatofilho@608: `config.cache' that saves the results of its tests to speed up renatofilho@608: reconfiguring, and a file `config.log' containing compiler output renatofilho@608: (useful mainly for debugging `configure'). renatofilho@608: renatofilho@608: If you need to do unusual things to compile the package, please try renatofilho@608: to figure out how `configure' could check whether to do them, and mail renatofilho@608: diffs or instructions to the address given in the `README' so they can renatofilho@608: be considered for the next release. If at some point `config.cache' renatofilho@608: contains results you don't want to keep, you may remove or edit it. renatofilho@608: renatofilho@608: The file `configure.in' is used to create `configure' by a program renatofilho@608: called `autoconf'. You only need `configure.in' if you want to change renatofilho@608: it or regenerate `configure' using a newer version of `autoconf'. renatofilho@608: renatofilho@608: The simplest way to compile this package is: renatofilho@608: renatofilho@608: 1. `cd' to the directory containing the package's source code and type renatofilho@608: `./configure' to configure the package for your system. If you're renatofilho@608: using `csh' on an old version of System V, you might need to type renatofilho@608: `sh ./configure' instead to prevent `csh' from trying to execute renatofilho@608: `configure' itself. renatofilho@608: renatofilho@608: Running `configure' takes awhile. While running, it prints some renatofilho@608: messages telling which features it is checking for. renatofilho@608: renatofilho@608: 2. Type `make' to compile the package. renatofilho@608: renatofilho@608: 3. Optionally, type `make check' to run any self-tests that come with renatofilho@608: the package. renatofilho@608: renatofilho@608: 4. Type `make install' to install the programs and any data files and renatofilho@608: documentation. renatofilho@608: renatofilho@608: 5. You can remove the program binaries and object files from the renatofilho@608: source code directory by typing `make clean'. To also remove the renatofilho@608: files that `configure' created (so you can compile the package for renatofilho@608: a different kind of computer), type `make distclean'. There is renatofilho@608: also a `make maintainer-clean' target, but that is intended mainly renatofilho@608: for the package's developers. If you use it, you may have to get renatofilho@608: all sorts of other programs in order to regenerate files that came renatofilho@608: with the distribution. renatofilho@608: renatofilho@608: Compilers and Options renatofilho@608: ===================== renatofilho@608: renatofilho@608: Some systems require unusual options for compilation or linking that renatofilho@608: the `configure' script does not know about. You can give `configure' renatofilho@608: initial values for variables by setting them in the environment. Using renatofilho@608: a Bourne-compatible shell, you can do that on the command line like renatofilho@608: this: renatofilho@608: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure renatofilho@608: renatofilho@608: Or on systems that have the `env' program, you can do it like this: renatofilho@608: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure renatofilho@608: renatofilho@608: Compiling For Multiple Architectures renatofilho@608: ==================================== renatofilho@608: renatofilho@608: You can compile the package for more than one kind of computer at the renatofilho@608: same time, by placing the object files for each architecture in their renatofilho@608: own directory. To do this, you must use a version of `make' that renatofilho@608: supports the `VPATH' variable, such as GNU `make'. `cd' to the renatofilho@608: directory where you want the object files and executables to go and run renatofilho@608: the `configure' script. `configure' automatically checks for the renatofilho@608: source code in the directory that `configure' is in and in `..'. renatofilho@608: renatofilho@608: If you have to use a `make' that does not supports the `VPATH' renatofilho@608: variable, you have to compile the package for one architecture at a time renatofilho@608: in the source code directory. After you have installed the package for renatofilho@608: one architecture, use `make distclean' before reconfiguring for another renatofilho@608: architecture. renatofilho@608: renatofilho@608: Installation Names renatofilho@608: ================== renatofilho@608: renatofilho@608: By default, `make install' will install the package's files in renatofilho@608: `/usr/local/bin', `/usr/local/man', etc. You can specify an renatofilho@608: installation prefix other than `/usr/local' by giving `configure' the renatofilho@608: option `--prefix=PATH'. renatofilho@608: renatofilho@608: You can specify separate installation prefixes for renatofilho@608: architecture-specific files and architecture-independent files. If you renatofilho@608: give `configure' the option `--exec-prefix=PATH', the package will use renatofilho@608: PATH as the prefix for installing programs and libraries. renatofilho@608: Documentation and other data files will still use the regular prefix. renatofilho@608: renatofilho@608: In addition, if you use an unusual directory layout you can give renatofilho@608: options like `--bindir=PATH' to specify different values for particular renatofilho@608: kinds of files. Run `configure --help' for a list of the directories renatofilho@608: you can set and what kinds of files go in them. renatofilho@608: renatofilho@608: If the package supports it, you can cause programs to be installed renatofilho@608: with an extra prefix or suffix on their names by giving `configure' the renatofilho@608: option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. renatofilho@608: renatofilho@608: Optional Features renatofilho@608: ================= renatofilho@608: renatofilho@608: Some packages pay attention to `--enable-FEATURE' options to renatofilho@608: `configure', where FEATURE indicates an optional part of the package. renatofilho@608: They may also pay attention to `--with-PACKAGE' options, where PACKAGE renatofilho@608: is something like `gnu-as' or `x' (for the X Window System). The renatofilho@608: `README' should mention any `--enable-' and `--with-' options that the renatofilho@608: package recognizes. renatofilho@608: renatofilho@608: For packages that use the X Window System, `configure' can usually renatofilho@608: find the X include and library files automatically, but if it doesn't, renatofilho@608: you can use the `configure' options `--x-includes=DIR' and renatofilho@608: `--x-libraries=DIR' to specify their locations. renatofilho@608: renatofilho@608: Specifying the System Type renatofilho@608: ========================== renatofilho@608: renatofilho@608: There may be some features `configure' can not figure out renatofilho@608: automatically, but needs to determine by the type of host the package renatofilho@608: will run on. Usually `configure' can figure that out, but if it prints renatofilho@608: a message saying it can not guess the host type, give it the renatofilho@608: `--host=TYPE' option. TYPE can either be a short name for the system renatofilho@608: type, such as `sun4', or a canonical name with three fields: renatofilho@608: CPU-COMPANY-SYSTEM renatofilho@608: renatofilho@608: See the file `config.sub' for the possible values of each field. If renatofilho@608: `config.sub' isn't included in this package, then this package doesn't renatofilho@608: need to know the host type. renatofilho@608: renatofilho@608: If you are building compiler tools for cross-compiling, you can also renatofilho@608: use the `--target=TYPE' option to select the type of system they will renatofilho@608: produce code for and the `--build=TYPE' option to select the type of renatofilho@608: system on which you are compiling the package. renatofilho@608: renatofilho@608: Sharing Defaults renatofilho@608: ================ renatofilho@608: renatofilho@608: If you want to set default values for `configure' scripts to share, renatofilho@608: you can create a site shell script called `config.site' that gives renatofilho@608: default values for variables like `CC', `cache_file', and `prefix'. renatofilho@608: `configure' looks for `PREFIX/share/config.site' if it exists, then renatofilho@608: `PREFIX/etc/config.site' if it exists. Or, you can set the renatofilho@608: `CONFIG_SITE' environment variable to the location of the site script. renatofilho@608: A warning: not all `configure' scripts look for a site script. renatofilho@608: renatofilho@608: Operation Controls renatofilho@608: ================== renatofilho@608: renatofilho@608: `configure' recognizes the following options to control how it renatofilho@608: operates. renatofilho@608: renatofilho@608: `--cache-file=FILE' renatofilho@608: Use and save the results of the tests in FILE instead of renatofilho@608: `./config.cache'. Set FILE to `/dev/null' to disable caching, for renatofilho@608: debugging `configure'. renatofilho@608: renatofilho@608: `--help' renatofilho@608: Print a summary of the options to `configure', and exit. renatofilho@608: renatofilho@608: `--quiet' renatofilho@608: `--silent' renatofilho@608: `-q' renatofilho@608: Do not print messages saying which checks are being made. To renatofilho@608: suppress all normal output, redirect it to `/dev/null' (any error renatofilho@608: messages will still be shown). renatofilho@608: renatofilho@608: `--srcdir=DIR' renatofilho@608: Look for the package's source code in directory DIR. Usually renatofilho@608: `configure' can determine that directory automatically. renatofilho@608: renatofilho@608: `--version' renatofilho@608: Print the version of Autoconf used to generate the `configure' renatofilho@608: script, and exit. renatofilho@608: renatofilho@608: `configure' also accepts some other, not widely useful, options.