Bookloupe documentation

 bookloupe: lists possible common formatting errors in a Project

 Gutenberg candidate file. Bookloupe is based on gutcheck, written

 by Jim Tinsley. It is a command line program and can be used under

 Microsoft Windows, Mac or Unix. For Windows-only people, there is

 an appendix at the end with brief instructions for running it.

 Current version: 2.0

 This software is Copyright Jim Tinsley 2000-2005 and

 J. Ali Harlow 2012 onwards.

 Bookloupe comes wih ABSOLUTELY NO WARRANTY. For details, read the file COPYING.

 This is Free Software; you may redistribute it under certain conditions (GPL).

 See http://www.juiblex.co.uk/pgdp/bookloupe/ for the latest version.

 Usage is: bookloupe [-setopxlywm] filename

       where:

       -s checks Single quotes 

       -e switches off Echoing of lines 

       -t checks Typos

       -o produces an Overview only

       -p sets strict quotes checking for Paragraphs

       -x (paranoid) switches OFF typo checking and extra checks

       -l turns off Line-end checks

       -y sets error messages to stdout

       -w is a special mode for web uploads (for future use)

       -v (verbose) forces individual reporting of minor problems

       -m interprets Markup of some common HTML tags and entities    

       -u warns about words in a user-defined typo file gutcheck.typ 

       -d ignores some DP-specific markup

 Running bookloupe without any parameters will display a brief help message.

 Sample usage: 

     bookloupe warpeace.txt

 More detail:

     Character encoding

       Bookloupe will handle e-texts encoded in UTF-8 (preferred),

       ISO-8859-1 (also known as Latin-1), or WINDOWS-1252 (also known,

       incorrectly, as ansi). The output will be in the same encoding

       as the input e-text.

     Echoing lines (-e to switch off)

       You may find it convenient, when reviewing Bookloupe's 

       suggestions, to see the line that Bookloupe is questioning.

       That way, you can often see at a glance whether it is

       a real error that needs to be fixed, or a false positive

       that should be in the text, but Bookloupe's limited

       programming doesn't understand.

       By default, bookloupe echoes these lines, but if you don't 

       want to see the lines referred to, -e will switch it OFF.

     Quotes (-s and -p switches)

       Bookloupe always looks for unbalanced doublequotes in a 

       paragraph. It is a common convention for writers not to

       close quotes in a paragraph if the next paragraph opens

       with quotes and is a continuation by the same speaker.

       Bookloupe therefore does not normally report unclosed quotes 

       if the next paragraph begins with a quote. If you need

       to see all unclosed quotes, even where the next paragraph

       begins with a quote, you should use the -p switch.

       Singlequotes (' and ’) are a problem, since the same

       character is used for an apostrophe. I'm not sure that it is

       possible to get 100% accuracy on singlequotes checking,

       particularly since dialect, quite common in PG texts,

       upsets the normal rules so badly. Consider the sentence:

         'Tis often said that a man's a man for a' that.

       As humans, we recognize that both apostrophes are used

       for contractions rather than quotes, but it isn't easy 

       to get a program to recognize that.

       Since bookloupe makes too many mistakes when trying to match

       singlequotes, it doesn't look for unbalanced singlequotes

       unless you specify the -s switch.

       Consider these sentences, which illustrate the main cases:

         'Tis often said that a fool and his money are soon parted.

         'Becky's goin' home,' said Tom.

         The dogs' tails wagged in unison.

         Those 'pack dogs' of yours look more like wolves.

     Typos (-t switch)

       It's not bookoupe's job to be a spelling checker, but it

       does check for a list of common typos and OCR errors if you

       use the -t switch. (The -x switch also turns typo checking on.)

       It also checks for character combinations, especially involving

       h and b, which are often confused by OCR, that rarely or never

       occur. For example, it queries "tbe" in a word. Now, "the" often

       occurs, but "tbe" is very rare (heartbeat, hotbed), so I'm

       playing the odds - a few false positives for many errors found.

       Similarly with "ii", which is a very common OCR error.

       Bookloupe suppresses multiple reporting of the first 40 "typos"

       found. This is to remove the annoyance of seeing something like

       "FN" (footnote) or "LK" (initials) flagged as a typo 147 times

       in a text. 

     Line-end checking (-l switch to disable)

       All PG texts should have a Carriage Return (CR - character 13)

       and a Line Feed (LF - character 10) at end of each line,

       regardless of what O/S you made them on. DOS/Windows, Unix

       and Mac have different conventions, but the final text should

       always use a CR/LF pair as its line terminator.

       By default, bookloupe verifies that every line does have

       the correct terminator, but if you're on a work-in-progress

       in Linux, you might want to convert the line-ends as a final

       step, and not want to see thousands of errors every time you

       run bookloupe before that final step, so you can turn off 

       this checking with the -l switch.

     Paranoid mode (-x switch to disable: Trust No One :-)

       -x switches OFF typo-checking, the -t flag, automatically

       and some extra checks like standalone 1 and 0 queries.

     Overview mode (-o switch)

       This mode just gives a count of queries found

       instead of a detailed list.

     Header quote  (-h switch)

       If you use the -h switch, bookloupe will also display

       the Title, Author, Release and Edition fields from the

       PG header. This is useful mostly for the automated

       checks we do on recently-posted texts.

     Errors to stdout (-y switch)

       If you're just running bookloupe normally, you can ignore

       this. It's only there for programs that provide a front

       end to bookloupe. It makes error messages appear within

       the output of bookloupe so that the front end knows whether

       bookloupe ran OK.

     Verbose reporting (-v switch)

       Normally, if bookloupe sees lots of long lines, short lines,

       spaced dashes, non-ASCII characters or dot-commas ".," it

       assumes these are features of the text, counts and summarizes

       them at the top of its report, but does not list them 

       individually. If the -v switch is on, bookloupe will list them all.

     Markup interpretation (-m switch)

       Normally, bookloupe flags anything it suspects of being HTML

       markup as a possible error. When you use the -m switch,

       however, it matches anything that looks like markup against

       a short list of common HTML tags and entities. If the markup

       is in that list, it either ignores the markup, in the case

       of a tag, or "interprets" the markup as its nearest ASCII 

       equivalent, in the case of an entity. So, for example, using

       this switch, bookloupe will "see"

       &ldquo;He went <i>thataway!</i>&rdquo;

       as

       "He went thataway!"

       and report accordingly.

       This switch does not, not, NOT check the validity of HTML;

       it exists so that you can run bookloupe on most HTML texts

       for PG, and get sane results. It does not support all tags.

       It does not support all entities. When it sees a tag or entity

       it does not recognize, it will query it as HTML just as if

       you hadn't specified the -m switch.

       Bookloupe will automatically switch on markup interpretation

       if it sees a lot of tags that appear to be markup, so mostly, you

       won't have to specify this.

     User-defined typos (-u switch)

       If you have a file named bookloupe.typ or gutcheck.typ either

       in your current working directory or in the directory from

       which you explicitly invoked bookoupe, but not necessarily on

       your path, and if you specify the -u switch, bookloupe will

       query any word specified in that file. The file is simple: one

       word, in lower case, per line. Be careful not to put multiple

       words onto a line, or leave any rubbish other than the word on

       the line. You should have received a sample file bookloupe.typ

       with this package. The file may be encoded in UTF-8 (preferred),

       ISO-8859-1 (also known as Latin-1), or WINDOWS-1252 (also known,

       incorrectly, as ansi).

     Ignore DP markup (-d switch)

       Distributed Proofreaders (http://www.pgdp.net) has for some

       time been the main source of PG texts, and proofers there use

       special conventions. This switch understands those conventions,

       so that people can use bookloupe on files in process that still

       haven't had the special conventions removed yet. The special

       conventions supported are page-separators and

       "<sc>", "</sc>", "/*", "*/", "/#", "#/", "/$", "$/".

 You will probably only run bookloupe on a text once or maybe twice,

 just prior to uploading; it usually finds a few formatting problems;

 it also usually finds queries that aren't problems at all - it often

 questions Tables of Contents for having short lines, for example.

 These are called "false positives," and need a human to decide on

 them.

 The text should be standard prose, and already close to PG normal

 format (plain text, about 70 characters per line with blank lines

 between paragraphs).

 Bookloupe merely draws your attention to things that might be errors.

 It is NOT a substitute for human judgement. Formatting choices like

 short lines may be for a reason that this program can't understand.

 Even the most careful human proofing can leave errors behind in a

 text, and there are several automated checks you can do to help find

 them. Of these, spellchecking (with _very_ careful human judgement) is

 the most important and most useful.

 Bookloupe does perform some basic typo-checking if you ask it to,

 but its focus is on formatting errors specific to PG texts—

 mismatched quotes, non-ASCII characters, bad spacing, bad line

 length, HTML tags perhaps left from a conversion, unbalanced

 brackets.

 Suggestions for additional checks would be appreciated and duly 

 considered, but no guarantees that they will be implemented.

         How does Jim Tinsley use gutcheck?

 Practically everyone I give gutcheck to asks me how _I_ use it.

 Well, when I get a text for posting, say filename.txt, I run

     gutcheck -o filename.txt

 That gives me a quick idea what I'm dealing with. It'll tell

 me what kind of problems gutcheck sees, and give me an idea 

 of how much more work needs to be done on the text. Keep in 

 mind that gutcheck doesn't do anything like a full spellcheck,

 but when I see a text that has a lot of problems, I assume that

 it probably needs a spellcheck too.

 Having got a feel for the ballpark, I run

     gutcheck filename.txt > jj

 where jj is my personal, all-purpose filename for temporary data

 that doesn't need to be kept. Then I open filename.txt and jj in

 a split-screen view in my editor, and work down the text, fixing

 whatever needs fixing, and skipping whatever doesn't. If your 

 editor doesn't split-screen, you can get much the same effect by 

 opening your original file in your normal editor, and jj (or your

 equivalent name) in something like Notepad, keeping both in view 

 at the same time.

 Twice a day, an automatic process looks at all recently-posted

 texts, and emails Michael, me, and sometimes other people with

 their gutcheck summaries.

         Future development of bookloupe

 Future versions will add support for UTF-8 characters that

 are not in ISO-8859-1 (eg., curled quotation marks);

 characters that do not have a composed form (version 2.0

 treats these as taking 2 or more columns); zero width and

 wide characters (version 2.0 treats these as taking 1 column).

 Explanations of common bookloupe messages:

     --> 74 lines in this file have white space at end

     PG texts shouldn't have extra white space added at end of line.

     Don't worry too much about this; they're not doing any harm,

     and they'll be removed during posting anyway.

     --> 348 lines in this file are short. Not reporting short lines.

     --> 84 lines in this file are long. Not reporting long lines.

     --> 8 lines in this file are VERY long!

     If there are a lot of long or short lines, bookloupe won't list

     them individually. The short lines version of this message

     is commonly seen when gutchecking poetry and some plays, where

     the normal line length is shorter than the standard for prose.

     A "VERY long" line is one over 80 characters.  You normally

     shouldn't have any of these, but sometimes you may have to render

     a table that must be that long, or some special preformatted

     quotation that can't be broken.

     --> There are 75 spaced dashes and em-dashes in this file. Not reporting them.

     The PG standard for an emdash--like these--is two minus signs

     with no spaces before or after them. However, some older texts

     used spaced dashes - like these -- and if there are very many

     such spaced dashes in the file, bookoupe just draws your

     attention to it and doesn't list them individually.

     Line 3020 - Non-ASCII character 233

     Standard PG texts should use only ASCII characters with values

     up to 127; however, non-English, accented characters can be 

     represented according to several different non-ASCII encoding 

     schemes, using values over 127. If you have a plain English text

     with a few accented characters in words like cafe or tete-a-tete,

     you might replace the accented characters with their unaccented 

     versions. The English pound sign is another commonly-seen

     non-ASCII character. If you have enough non-ASCII characters in

     your text that you feel removing them would degrade your text,

     you should probably consider doing a UTF-8 text.

     Line 1207 - Non-ISO-8859 character 156

     Even in "8-bit" texts, there are distinctions between code sets.

     The ISO-8859 family of 8-bit code sets is the most commonly used

     in PG, and these sets do not define values in the range 128 through

     159 as printable characters. It's quite common for someone on a

     Windows or Mac machine to use a non-ISO character inadvertently,

     so this message warns that the character is not only not ASCII,

     but also outside the ISO-8859 range.

     Line 46 - Tab character?

     Some editors and WPs will put in Tab characters (character 9) to

     indicate indented text. You should not use these in a PG text,

     because you can't be sure how they will appear on a reader's

     screen. Find the Tab, and replace it with the appropriate number

     of spaces.

     Line 1327 - Tilde character?

     The tilde character (~) might be legitimately used, but it's the

     character commonly used by OCR software to indicate a place where

     it couldn't make out the letter, so bookloupe flags it.

     Line 1347 - Asterisk?

     Asterisks are reported only in paranoid mode (see -x). 

     Like tildes, they are often used to indicate errors, but they are

     also legitimately used as line delimiters and footnote markers.

     Line 1451 - Long line 129

     PG texts should have lines shorter than 76. There may be occasions

     where you decide that you really have to go out to 79 characters,

     but the sample above says that line 1451 is 129 characters long—

     probably two lines run together.

     Line 1590 - Short line?

     PG texts should have lines longer than 54 characters. However,

     there are special cases like poetry and tables of contents where

     the lines _should_ be shorter. So treat bookloupe warnings about

     short lines carefully. Sometimes it's a genuine formatting

     problem; sometimes the line really needs to be short.

     Hint: bookloupe will not flag lines as short if they are indented

     —if they start with a space. I like to start inserted stanzas

     and other such items indented with a couple of spaces so that 

     they stand out from the main text anyway.

     Line 1804 - Begins with punctuation?

     Lines should normally not begin with commas, periods and so on.

     An exception is ellipses . . . which can happen at start of line.

     Line 1850 - Spaced em-dash?

     The PG standard for an em-dash--like these--is two minus signs

     with no spaces before or after them. Bookloupe flags non-PG

     em-dashes - like this one. Normally, you will replace it with a 

     PG-standard em-dash.

     Line 1904 - Query he/be error?

     Bookloupe makes a very minor effort to look for that scourge of all

     proofreaders, "be" replacing "he" or vice-versa, and draws your

     attention to it when it thinks it has found one.

     Line 2017 - Query digit in a1most

     The digit 1 is commonly OCRed for the letter l, the digit 0 for

     the letter O, and so on. When bookloupe sees a mix of digits and

     letters, it warns you. It may generate a false positive for

     something like 7am.

     Line 2083 - Query standalone 0

     In paranoid mode (see -x) only, bookloupe warns about the digit 0 

     and the number 1 standing alone as a word. This can happen if the 

     OCR misreads the words O or I.

     Line 2115 - Query word whetber

     If you have switched typo-checking on, bookloupe looks for

     potential typos, especially common h/b errors. It's not

     infallible; it sometimes queries legit words, but it's

     always worth taking a look.

     Line 2190 column 14 - Missing space?

     Omitting a space is a very common error,especially coming from

     OCRed text,and can be hard for a human to spot. The commas in

     the previous sentence illustrate the kind of thing I mean.

     Line 2240 column 48 - Spaced punctuation?

     The flip side of the "missing space" error , here , is when extra

     spaces are added before punctuation . Some old texts appear to add

     extra spaces around punctuation consistently, but this was a

     typographical convention rather than the author's intent, and the

     extra "spaces" should be removed when preparing a PG text.

     Line 2301 column 19 - Unspaced quotes?

     Another common spacing problem occurs in a phrase like "You wait

     there,"he said.

     Line 2385 column 27 - Wrongspaced quotes?

     Bookloupe checks whether a quote seems to be a start or end quote,

     and queries those that appear to be misplaced. This does give rise

     to false positives when quotes are nested, for example:

     "And how," she asked, "will your "friends" help you now?"

     but these false positives are worth it because of the many cases

     that this test catches, notably those like:

     "And how, "she said," will your friends help you now?"

     Sometimes a "wrongspaced quotes" query will arise because an earlier

     quote in the paragraph was omitted, so if the place specified seems

     to be OK, look back to see whether there's a problem in the preceding

     lines.

     Line 2400 - HTML Tag? <PRE>

     Some PG texts have been converted from HTML, and not all of the

     HTML tags have been removed.

     Line 2402 - HTML symbol? &emdash;

     Similarly, special HTML symbol characters can survive into PG

     texts. Can occasionally produce amusing false positives like

     . . . Marwick & Co were well known for it;

     Line 2540 - Mismatched quotes

     Another bookloupe mainstay—unclosed doublequotes in a paragraph.

     See the discussion of quotes in the switches section near the

     start of this file.

     Since the mismatch doesn't occur on any one line, bookloupe quotes

     the line number of the first blank line following the paragraph,

     since this is the point where it reconciles the count of quotes.

     However, if bookloupe is echoing lines, that is, you haven't used

     the -e switch, it will show the _first_ line of the paragraph, 

     to help you find the place without using line numbers. The 

     offending paragraph is therefore between the quoted line and 

     the line number given.

     Line 2587 - Mismatched single quotes

     Only checked with the -s switch, since checking single quotes is 

     not a very reliable process. Otherwise, the same logic as for 

     doublequotes applies.

     Line 2877 - Mismatched round brackets?

     Also curly and square brackets. Texts with a lot of brackets, like

     plays with bracketed stage instructions, may have mismatches.

     Line 3150 - No CR?

     Line 3204 - Two successive CRs?

     Line 3281 position 75 - CR without LF?

     These are the invalid line-end warnings. See the discussion of

     line-end checking in the switches section near the start of this

     file. If you see these, and your editor doesn't show anything

     wrong, you should probably try deleting the characters just before

     and after the line end, and the line-end itself, then retyping the

     characters and the line-end.

     Line 2940 - Paragraph starts with lower-case

     A common error in an e-text is for an extra blank line

     to be put in, like the blank line above, and this often

     shows up as a new paragraph beginning with lower case.

     Sometimes the blank line is deliberate, as when a 

     quotation is inserted in a speech. Use your judgement.

     Line 2987 - Extra period?

     An extra period. is a. common problem in OCRed text. and usually

     arises when a speck of dust on the page is mistaken for a period.

     or. as occasionally happens. when a comma loses its tail.

     Line 3012 column 12 - Double punctuation?

     Double punctuation., like that,, is a common typo and

     scanno. Some books have much legit double punctuation,

     like etc., etc., but it's worth checking anyway.

             *       *       *        *

 For Windows-only users who are unfamiliar with DOS:

     If you're a Windows-only user, you need to save

     bookloupe.exe into the folder (directory) where the

     text file you want to check is. Let's say your

     text file is in C:\gut, then you should save

     bookloupe.exe into C:\gut.

     Now get to a console. You can do this by

     selecting the "Command Prompt" or "MS-DOS Prompt"

     option that will be somewhere on your

     Start/Programs menu.

     Now get into the C:\gut directory. 

     You can do this using the cd (change directory) 

     command, like this:

         cd \gut

     and your prompt will change to 

         C:\gut>

     so you know you're in the right place.

     Now type

         bookloupe yourfile.txt

     and you'll see bookloupe's report

     By default, bookloupe prints its queries to screen.

     If you want to create a file of them, to edit

     against the text, you can use the greater-than

     sign (>) to tell it to output the report to a

     file. For example, if you want its report in a

     file called queries.lst, you could type

         bookloupe yourfile.txt > queries.lst

     The queries.lst file will then contain the listing

     of possible formatting errors, and you can

     edit it alongside your text.

     Whatever you do, DON'T make the filename after

     the greater-than sign the name of a file already

     on your disk that you want to keep, because

     the greater-than sign will cause bookloupe to

     replace any existing file of that name.

     So, for example, if you have two Tolstoy files

     that you want to check, called WARPEACE.TXT and 

     ANNAK.TXT, make sure that neither of these names

     is ever used following the greater-than sign.

     To check these correctly, you might do:

     bookloupe warpeace.txt > war.lst

     and

     bookloupe annak.txt > annak.lst

     separately. Then you can look at war.lst and annak.lst

     to see the bookloupe reports.

 For Windows-only users who want to use bookloupe from guiguts:

     1) If you haven't already done so, download bookloupe-win32-xxx.zip

     from http://www.juiblex.co.uk/pgdp/bookloupe/

     2) Extract the files into a suitable folder, e.g. C:\DP\bookloupe

     3) Start Guiguts

     4) Choose Preferences | File Paths | Set File Paths..

     5) Click the "Locate Gutcheck..." button

     6) Browse to the folder where you extracted bookloupe

     7) Double-click bookloupe.exe 

     Now, whenever you do "Gutcheck" in Guiguts, it will run bookloupe

     instead. Since the output will look very like gutcheck output, you

     may want to check that it is actually bookloupe that is running. To do

     this, look at the black command line message window, which will say:

     "bookloupe: Check and report on an e-text".

     To return to using gutcheck for any reason, repeat steps 4 and 5

     above, and then,

     6b) Browse back to the gutcheck folder, which is in a "tools"

     folder inside the main Guiguts folder. It will be something like

     "C:\DP\guiguts-win\tools\gutcheck", depending on where you installed

     Guiguts originally.

     7b) Double-click gutcheck.exe

     Now doing "Gutcheck" in Guiguts will run gutcheck itself, and the

     message in the black window should read:

     "gutcheck: Check and report on an e-text".